Pomi艅, aby przej艣膰 do informacji o produkcie
1 z 4

GATE Enterprise

MERF 3.2

MERF 3.2

Cena regularna 220,90 PLN
Cena regularna Cena sprzeda偶y 220,90 PLN
Promocja Wyprzedane
Z wliczonym podatkiem. Koszt wysy艂ki obliczony przy realizacji zakupu.
Najni偶sza cena z ostatnich 30 dni: 220,90 PLN (30.08.2023)

Kolor mo偶e si臋 nieznacznie r贸偶ni膰 w zale偶no艣ci od partii.

Darmowa wysy艂ka kurierem powy偶ej 200z艂

Wysy艂ka i zwroty

Multifunctional programmable 3rd generation MOSFET. The system has 10 functions. Its latest feature is the 3-rd Burst Mode, which allows for limiting the number of shots. The system allows for lossless rate of fire adjustment.

It protects Li-Ion batteries: LiPoly and LiFePO4. It has a聽built-in active brake and it protects contacts against damage. The Smart Trigger function enables achieving faster trigger response. Thanks to two operating modes, the system works with both the original and the modified AEG installation. The system is designed for all replicas and especially for the upgraded ones. It has been adapted to work even with the most powerful springs, including M170.

mosfet

MOSFET

Do you want to achieve higher rate of fire and faster trigger response? Are you planning power upgrade of your rifle? In that case, you need a聽MOSFET.

It targets the energy from the battery directly to the motor, bypassing the mechanical trigger contacts. As a聽result, you gain a聽higher rate of fire of the rifle and faster trigger response, and the contacts are protected against burn out.

ab

Active Brake

Do you care about realism? Would you like to increase the life of the gearbox? Does your rifle have such high rate of fire that you are not able to make a聽single shot? Active brake sorts things out.

In SEMI Mode, the brake does not allow for compressing a聽piston after a聽shot. The piston will stop in front position which eliminates unnecessary stresses, increasing the service life of gearbox and its parts. It is very important, especially with an AEG power upgrade.

After releasing the trigger, the rifle immediately stops firing. Thus, you gain more realism and, additionally, you do聽not waste your precious ammunition.

fuse

Electronic Fuse

We know how important reliability is on the battlefield. That鈥檚 why our new MOSFET has thermal protection. In tandem with a聽time-lag fuse, it fully protects your AEG installation.

battery protection

Protection against Over-Discharge of Battery (UVP Protection)

Modern LiPoly batteries are very sensitive to over-discharge. If you do聽not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor constantly monitors the battery voltage. When it drops down to a聽critical level, it will not permit firing.

debouncing

Debouncing聽(Digital Interface)

This provides full compatibility with the micro-switches. It is fully resistant to contact bounce. You gain a聽bigger ROF, a聽faster trigger response and your MOSFET is less prone to heating.

m3g

3rd Generation MOSFET

The usage of modern transistors and microcontroller has enabled us to create the smallest and most reliable AEG Controller in the market.

rfc

Rate Of Fire Control

It enables lossless reduction of rifle鈥檚 rate of fire, so you can use stronger LiPo batteries, and still have ROF just like in a聽real gun.

st

Smart Trigger

We know how vital the fast trigger response is during combat. Victory is often a聽matter of fractions of seconds. This is why we have developed the Smart Trigger function. This function enables you to achieve faster trigger response.

It works with the ROF Control system. During the first shot, the microprocessor sets ROF Control to 100%. After the first shot, it is switched to the previously programmed value, e.g. 30%. As a聽consequence, the first shot is fired with full rate of fire, and subsequent ones with a聽reduced ROF. The best results can be achieved by using a聽battery with higher voltage than a聽standard one. For example, if we use a聽7.4V battery, we can change it to 11.1V. In this way, we will achieve faster trigger response with the same rate of fire as with a聽standard battery.

3burst

3-rd burst mode

Burst mode enables you to make 3-shot series. In this way you can save ammunition and increase the realism. You can change AUTO mode to BURST mode or SEMI* mode to BURST mode.

If in SAFE/SEMI/BURST mode you release the trigger earlier, you can make one or two shots. The burst time is set in the menu with accuracy to 4ms. The processor actively compensates for the change in burst time with a聽decrease in the rate of fire due to battery discharging.

*SEMI to BURST in enhanced mode only

6 configurable-fire-selector

CONFIGURABLE FIRE SELECTOR

The function gives you the option to program your fire selector. There are five operating modes:

-聽STOCK WIRING SEMI/AUTO
-聽STOCK WIRING SEMI/BURST
-聽MODIFIED WIRING SEMI/AUTO
-聽MODIFIED WIRING SEMI/BURST
-聽MODIFIED WIRING BURST/AUTO

tp

Operating Modes

You can connect the system to a聽rifle in two ways. Depending on the selected method, you should set a聽proper operating mode: Plug&Play or Enhanced

Plug&Play: All you need to do聽is connect the system between the battery and the rifle.

Enhanced Mode: It requires modification of AEG installation. We connect trigger contacts to MERF. We can do聽it using the signal wire attached to the kit.

Poka偶 kompletne dane
1 z 3

Mo偶e Ci si臋 przyda膰

1 z 4